View XC6215P502GR-G_7382922.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1/36 xc6215 series 0.8 a low power consumption voltage regulator with on/off switch general description the xc6215 series are highly precise, lo w noise, positive voltage ldo regulators manufactured using cmos processes. the series achieves very low supply current, 0.8 a (typ.) and consists of a reference volt age source, an error amplifier, a current foldback circuit, and a phase compensation circuit plus a driver transistor. ultra small packages usp-3, usp-4, uspn-4 and ssot-24, and small package sot-25 packages make high density mounting possible. therefore, t he series is ideal for applications where high dens ity mounting is required such as in mobile phones. output voltage is selectable in 0.1v in crements within a range of 0.9v ~ 5.0v by laser trimming the series is also compatible with low esr ceramic capacitors, which give added output stability. the current limiter's foldback circuit also operates as a shor t protect for the output current limiter and the output pin. furthermore, the ce function allows t he output of the regulator to be turned of f, resulting in greatly reduced power consumption. typical application circuit applications mobile phones cordless phones, wireless communication equipment portable games cameras, video recorders portable av equipment pdas features maximum output current : 200ma (300ma limit, typ.) @ v out =3.0v, v in =4.0v dropout voltage : 320mv @ i out = 100ma @ v out = 3.0v operating input voltage : 1.5v ~ 6.0v output voltage range : 0.9v ~ 5.0v (0.1v increments) highly accurate : set voltage accuracy 2% (1.5v 2/36 xc6215 series * for mounting intensity and heat dissipation, please refer to recommended mounting pattern and recommended metal mask when soldering the pad of usp-4. mounting should be electrically isolated or connected to the v ss (no.2) pin. pin number uspn-4 usp-3 usp-4 ssot-24 sot-25 pin name function 4 1 4 4 1 v in power supply 2 3 2 2 2 v ss ground 3 - 3 1 3 ce on / off switch 1 2 1 3 5 v out output - - - - 4 nc no connection designator description symbol description b ce logic = high active with no pull-down resistor type of regulator p 3 pin regulator with no ce pin (usp-3 only) ? output voltage 09 ~ 50 0.9 v ~ 5.0v, 0.1v step e.g. v out =3.0v =3, =0 output voltage accuracy 2 + 2 % accuracy e.g. v out =3.0v =3, =0, =2 gr-g usp-4 nr ssot-24 nr-g ssot-24 mr sot-25 mr-g sot-25 hr usp-3 (for the xc6215p series only) hr-g usp-3 (for the xc6215p series only) ?- packages taping type (*2) 7r-g uspn-4 pin configuration pin assignment product classification ordering information xc6215 ?????- ( *1 ) 2 1 3 3 vss vss vout vin usp-4 (bottom view) ssot-24 (top view) usp-3 (bottom view) sot-25 (top view) (*1) the ?-g? suffix indicates that the products are hal ogen and antimony free as well as being fully rohs compliant. (*2) the device orientation is fixed in its embossed tape pocket. for reverse orientatio n, please contact your local torex sales office o r representative. (standard orientation: r- , reverse orientation: l- ) uspn-4 (bottom view)
3/36 xc6215 series parameter symbol ratings units input voltage v in - 0.3 ~ + 7.0 v output current i out 500 (*1) ma output voltage v out v ss - 0.3 ~ v in + 0.3 v ce input voltage (*2) v ce v ss - 0.3 ~ + 7.0 v 250 sot-25 600(pcb mounted)(*3) 150 ssot-24 500(pcb mounted)(*3) 120 usp-4 1000(pcb mounted)(*3) usp-3 120 100 power dissipation uspn-4 pd 600(pcb mounted)(*3) mw operating temperature range topr - 40 ~ + 85 storage temperature range tstg - 55 ~ +125 a bsolute maximum ratings xc6215b series xc6215p series * diodes shown in the above circuit are esd protection diodes and parasitic diodes note: *1: iout = pd/ (vin-vout) *2: except for the xc6215p series *3: the power dissipation figure shown is pcb m ounted. please refer to pages 33 to 35 for details. block diagrams on/off control each circuit error amp - + current limit v in v ss v out r1 r2 voltage reference ce v out v ss r1 r2 v in error amp - + voltage reference current limit
4/36 xc6215 series parameter symbol conditions min. typ. max. unit. circuit output voltage (*2) v out(e) v in =v ce =v out(t) (*1) + 1.0v, i out =1ma e-0(*6) v v in =v ce =v out(t) + 1.0v v out(t)= 0.9v 50 70 - v in =v ce =v out(t) + 1.0v v out(t)= 1.0v ~ 1.1v 60 80 - v in =v ce =v out(t) + 1.0v v v out(t)= 1.2v ~ 1.3v 80 110 - v in =v ce =v out(t) + 1.0v v out(t)= 1.4v ~ 1.6v 100 140 - v in =v ce =v out(t) + 1.0v v out(t)= 1.7v ~ 2.2v 120 150 - v in =v ce =v out(t) + 1.0v v out(t)= 2.3v ~ 2.9v 150 195 - maximum output current i outmax v in =v ce =v out(t) + 1.0v v out(t) R 3.0v 200 300 - ma v in =v ce =v out(t) + 1.0v v out(t)= 0.9v 1ma Q i out Q 50ma v in =v ce =v out(t) + 1.0v v out(t)= 1.0v ~ 1.1v 1ma Q i out Q 60ma v in =v ce =v out(t) + 1.0v v out(t)= 1.2v~1.3v 1ma Q i out Q 80ma load regulation v out v in =v ce =v out(t) + 1.0v v out(t) R 1.4v 1ma Q i out Q 100ma - 15 70 mv 1 v ce =v in , v out(t)= 0.9v i out =50ma v ce =v in , v out(t)= 1.0v ~ 1.1v i out =60ma v ce =v in , v out(t)= 1.2v ~ 1.3v i out =80ma dropout voltage (*3) vdif v ce =v in , v out(t) R 1.4v i out =100ma e-1(*6) mv 1 v in =v ce =v out(t) + 1.0v v out(t) Q 3.9v - 0.8 1.5 supply current i dd v in =v ce =v out(t) + 1.0v v out(t) R 4.0v - 1.0 1.8 a 2 stand-by current istby v in =v out(t) + 1.0v, v ce =v ss - 0.01 0.10 a 2 xc6215b series electrical characteristics ta = 2 5
5/36 xc6215 series parameter symbol conditions min. typ. max. unit. circuit v out(t)= 0.9v, v ce =v in 1.5v Q v in Q 6.0v i out =1ma v out(t)= 1.0v~1.2v, v ce =v in v out(t)+ 0.5v Q v in Q 6.0v i out =1ma line regulation v out v in z v out v out(t) R 1.3v, v ce =v in v out(t)+ 0.5v Q v in Q 6.0v i out =30ma - 0.05 0.15 %/v input voltage v in - 1.5 - 6.0 v - output voltage temperature characteristics v out topr z v out v in =v ce =v out(t)+ 1.0v, i out =30ma - 40 < topr < 85 - 100 - ppm / v out =v out(e) 0.95 v out(t)= 0.9v v in =v ce = v out(t)+ 2.0v 100 300 - v out =v out(e) 0.95 v out(t)= 1.0v ~ 1.1v v in =v ce = v out(t)+ 2.0v 120 300 - v out =v out(e) 0.95 v out(t)= 1.2v ~ 1.3v v in =v ce = v out(t)+ 2.0v 160 300 - v out =v out(e) 0.95 v out(t)= 1.4v ~ 2.9v v in =v ce = v out(t)+ 2.0v 200 300 - current limit i iim v out =v out(e) 0.95 v out(t) R 3.0v v in =v ce = v out(t) +1.0v 200 300 - ma short circuit current ishort v in =v ce =v out(t)+ 1.0v, v out =0v - 50 - ma ce ?h? level voltage v ceh v in =v out(t)+ 1.0v 1.0 - 6.0 ce ?l? level voltage v cel v in =v out(t) +1.0v - - 0.3 v ce ?h? level current i ceh v in =v ce =v out(t)+ 1.0v - 0.1 - 0.1 ce ?l? level current i cel v in =v out(t)+ 1.0v, v ce =v ss - 0.1 - 0.1 a electrical char a cteristics (continued) xc6215b series (continued) ta = 2 5 note: *1: v out(t): fixed output voltage *2: v out(e) = effective output voltage (i.e. the output voltage when ?v out(t) + 1.0v? is provided at the v in pin while maintaining a certain i out value). *3: vdif = { v in1 (*4)? v out1 (*5) } *4: v in1 = the input voltage when v out1 appears as input voltage is gradually decreased. *5: v out1 = a voltage equal to 98% of the output voltage whenever an amply stabilized i out { v out(t) + 1.0v } is input. *6: refer to ?voltage chart?.
6/36 xc6215 series parameter symbol conditions min. typ. max. unit. circuit output voltage (*2) v out(e) v in =v out(t) (*1) + 1.0v, i out =1ma e-0 (*6) v v in =v out(t) + 1.0v v out(t)= 0.9v 50 70 - v in =v out(t) + 1.0v v out(t)= 1.0v ~ 1.1v 60 80 - vin=v out(t) + 1.0v v out(t)= 1.2v ~ 1.3v 80 110 - v in =v out(t) + 1.0v v out(t)= 1.4v ~ 1.6v 100 140 - v in =v out(t) + 1.0v v out(t)= 1.7v ~ 2.2v 120 150 - v in =v out(t) + 1.0v v out(t)= 2.3v ~ 2.9v 150 195 - maximum output current i outmax v in =v out(t) + 1.0v v out(t) R 3.0v 200 300 - ma v in =v out(t) + 1.0v v out(t)= 0.9v 1ma Q i out Q 50ma v in =v out(t) + 1.0v v out(t)= 1.0v~1.1v 1ma Q i out Q 60ma v in =v out(t) + 1.0v v out(t)= 1.2v~1.3v 1ma Q i out Q 80ma load regulation v out v in =v out(t) + 1.0v v out(t) R 1.4v 1ma Q i out Q 100ma - 15 70 mv 1 v out(t)= 0.9v i out =50ma v out(t)= 1.0v ~ 1.1v i out =60ma v out(t)= 1.2v ~ 1.3v i out =80ma dropout voltage (*3) vdif v out(t) R 1.4v i out =100ma e-1 (*6) mv 1 v in =v out(t)= 1.0v v out(t) Q 3.9v - 0.8 1.5 supply current i dd v in = v out(t)+ 1.0v v out(t) R 4.0v - 1.0 1.8 a 2 xc6215p series ta = 2 5 electrical characteristics (continued)
7/36 xc6215 series parameter symbol conditions min. typ. max. unit. circuit v out(t)= 0.9v 1.5v Q v in Q 6.0v i out =1ma v out(t)= 1.0v~1.2v v out(t)+ 0.5v Q v in Q 6.0v i out =1ma line regulation v out v in z v out v out(t) R 1.3v v out(t)+ 0.5v Q v in Q 6.0v i out =30ma - 0.05 0.15 %/v input voltage v in - 1.5 - 6.0 v - output voltage temperature characteristics v out topr z v out v in= v out(t)+ 1.0v , i out= 30 m a - 40 < topr < 85 - 100 - ppm / v out =v out(e) 0.95 v out(t)= 0.9v v in = v out(t)+ 2.0v 100 300 - v out =v out(e) 0.95 v out(t)= 1.0v ~ 1.1v v in =v out(t)+ 2.0v 120 300 - v out =v out(e) 0.95 v out(t)= 1.2v ~ 1.3v v in =v out(t)+ 2.0v 160 300 - v out =v out(e) 0.95 v out(t)= 1.4v ~ 2.9v v in =v out(t)+ 2.0v 200 300 - current limit i iim v out =v out(e) 0.95 v out(t) R 3.0v v in =v out(t)+ 1.0v 200 300 - ma short circuit current ishort v in =v out(t)+ 1.0v, v out =0v - 50 - ma electric a l characteristics (continued) xc6215p series (continued) ta = 2 5 note: *1: v out(t): fixed output voltage *2: v out(e) = effective output voltage (i.e. the output voltage when ?v out(t) + 1.0v? is provided at the v in pin while maintaining a certain i out value). *3: vdif = { v in1 (*4) ? v out1 (*5) } *4: v in1 = the input voltage when v out1 appears as input voltage is gradually decreased. *5: v out1 = a voltage equal to 98% of the output voltage whenever an amply stabilized i out { v out(t) + 1.0v } is input. *6: refer to ?voltage chart?.
8/36 xc6215 series e-0 e-1 setting output voltage output voltage (v) dropout voltage (mv) v out vdif v out(t) min. max. typ. max. 0.9 0.870 0.930 870 1000 1.0 0.970 1.030 860 1000 1.1 1.070 1.130 780 950 1.2 1.170 1.230 800 1000 1.3 1.270 1.330 720 900 1.4 1.370 1.430 750 960 1.5 1.470 1.530 700 890 1.6 1.568 1.632 680 860 1.7 1.666 1.734 650 830 1.8 1.764 1.836 630 800 1.9 1.862 1.938 610 780 2.0 1.960 2.040 580 740 2.1 2.058 2.142 580 740 2.2 2.156 2.244 580 740 2.3 2.254 2.346 510 650 2.4 2.352 2.448 510 650 2.5 2.450 2.550 450 580 2.6 2.548 2.652 450 580 2.7 2.646 2.754 450 580 2.8 2.744 2.856 450 580 2.9 2.842 2.958 450 580 3.0 2.940 3.060 320 420 3.1 3.038 3.162 320 420 3.2 3.136 3.264 320 420 3.3 3.234 3.366 320 420 3.4 3.332 3.468 320 420 3.5 3.430 3.570 320 420 3.6 3.528 3.672 320 420 3.7 3.626 3.774 320 420 3.8 3.724 3.876 320 420 3.9 3.822 3.978 320 420 4.0 3.920 4.080 290 380 4.1 4.018 4.182 290 380 4.2 4.116 4.284 290 380 4.3 4.214 4.386 290 380 4.4 4.312 4.488 290 380 4.5 4.410 4.590 290 380 4.6 4.508 4.692 290 380 4.7 4.606 4.794 290 380 4.8 4.704 4.896 290 380 4.9 4.802 4.998 290 380 5.0 4.900 5.100 230 310 voltage chart ta = 2 5 dropout voltage chart
9/36 xc6215 series test circuits circuit circuit v in v out v ss ce cl=0.1uf (ceramic) v v v cin=1.0uf (ceramic) a iout ishort rl vin vout vss ce open a a cin=1.0uf (ceramic)
10/36 xc6215 series operational explanation notes on use xc6215b series (as for the xc6215p series, with no ce pin) 1. please use this ic within the stated absolute maximum ratings. the ic is liable to malfunction should the ratings be exceede d. 2. where wiring impedance is high, op erations may become unstable due to noi se and/or phase lag depending on output current. 3. as for the xc6215 series, internally achieved phase compensation makes a stabl e operation of the ic possible even when there is no output capacitor (c l ). in order to stabilize the v in ?s voltage level, we recommend that an input capacitor (c in ) of about 0.1 to 1.0 f be connected between the v in pin and the v ss pin. moreover, during transient response, so as to prevent an undershoot or overshoot, we recommend that the output capacitor (c l ) of about 0.1 to1.0 f be connected between the v out pin and the v ss pin. however, please wire the input capacitor (c in ) and the output capacitor (c l ) as close to the ic as possible. the xc6215 series? regulator offers circuit protection by means of a built-in foldback circuit. when the load current reaches the current limit level, the fixed cu rrent limiter circuit operates a nd output voltage drops. as a re sult of this drop in output v oltage, the foldback circuit operates, the output voltage drops further and output current decreases. w hen the output pin is shorted, a current of about 50ma flows. the ic's internal circuitry can be operated or shutdown via the si gnal from the ce pin with the xc6215b series. in shutdown mode, output at the v out pin will be pulled down to the v ss level via r1 & r2. note that the xc6215 series? regulator is ?high active/no pull-down?, operations will become unstable with the ce pin open. we suggest that you use this ic with either a v in voltage or a v ss voltage input at the ce pin. if this ic is used with the correct specifications fo r the ce pin, the operational logic is fixed and the ic will operate normally. howeve r, supply current may increase as a resu lt of through current in the ic's intern al circuitry. the voltage divided by resistors r1 & r2 is compared with the in ternal reference voltage by the error amplifier. the p-channel mosfet, which is connected to the v out pin, is then driven by the subsequent output signal. the output voltage at the v out pin is controlled and stabilized by a system of negative feedback. the current limit circui t and short protect circuit operate in r elation to the level of output current. further, the ic's internal circuitry can be operated or shutdown via the ce pin's signal. on/off control each circuit error amp - + current limit v in v ss v out r1 r2 voltage reference ce
11/36 xc6215 series (1) output voltage vs. output current xc6215x302 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 50 100 150 200 250 300 350 output current i out (ma) output voltage v out (v) vin=vce=4.0v cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x302 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 50 100 150 200 250 300 350 output current i out (ma) output voltage v out (v) vin=3.3v vin=3.5v vin=4.0v vin=4.5v ta=25 cin=1.0 f(ceramic),cl=0.1 f(ceramic) ta=-40 ta=25 ta=85 xc6215x092 0.0 0.3 0.6 0.9 1.2 0 50 100 150 200 250 300 350 output current i out (ma) output voltage v out (v) vin=vce=1.9v cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x092 0.0 0.3 0.6 0.9 1.2 0 50 100 150 200 250 300 350 output current i out (ma) output voltage v out (v) vin=1.5v vin=1.9v vin=2.4v vin=2.9v ta=25 cin=1.0 f(ceramic),cl=0.1 f(ceramic) ta=-40 ta=25 ta=85 xc6215x152 0.0 0.3 0.6 0.9 1.2 1.5 1.8 0 50 100 150 200 250 300 350 output current i out (ma) output voltage v out (v) vin=vce=2.5v cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x152 0.0 0.3 0.6 0.9 1.2 1.5 1.8 0 50 100 150 200 250 300 350 output current i out (ma) output voltage v out (v) vin=1.8v vin=2.0v vin=2.5v vin=3.0v ta=25 cin=1.0 f(ceramic),cl=0.1 f(ceramic) ta=-40 ta=25 ta=85 typical performance characteristics
12/36 xc6215 series (1) output voltage vs. out put current (continued) (2) output voltage vs. input voltage typic a l performance characteristics (continued) xc6215x502 0.0 1.0 2.0 3.0 4.0 5.0 6.0 0 50 100 150 200 250 300 350 output current i out (ma) output voltage v out (v) vin=vce=6.0v cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x502 0.0 1.0 2.0 3.0 4.0 5.0 6.0 0 50 100 150 200 250 300 350 output current i out (ma) output voltage v out (v) vin=5.3v vin=5.5v vin=6.0v ta=25 cin=1.0 f(ceramic),cl=0.1 f(ceramic) ta=-40 ta=25 ta=85 xc6215x092 0.3 0.5 0.7 0.9 1.1 1.3 0.5 1 1.5 2 2.5 input voltage v in (v) output voltage v out (v) iout=1ma iout=30ma iout=50ma vin=vce cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x092 0.85 0.90 0.95 2 2.5 3 3.5 4 4.5 5 5.5 6 input voltage v in (v) output voltage v out (v) iout=1ma iout=30ma iout=50ma vin=vce cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x152 0.9 1.1 1.3 1.5 1.7 1.9 0.5 1 1.5 2 2.5 input voltage v in (v) output voltage v out (v) iout=1ma iout=30ma iout=50ma iout=100ma vin=vce cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x152 1.45 1.50 1.55 2.5 3 3.5 4 4.5 5 5.5 6 input voltage v in (v) output voltage v out (v) iout=1ma iout=30ma iout=50ma iout=100ma vin=vce cin=1.0 f(ceramic),cl=0.1 f(ceramic)
13/36 xc6215 series (2) output voltage vs. input voltage (continued) (3) dropout voltage vs. output current typical performance characteristics (continued) xc6215x302 2.4 2.6 2.8 3.0 3.2 3.4 22.5 33.54 input voltage v in (v) output voltage v out (v) iout=1ma iout=30ma iout=50ma iout=100ma vin=vce cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x302 2.95 3.00 3.05 3.5 4 4.5 5 5.5 6 input voltage v in (v) output voltage v out (v) iout=1ma iout=30ma iout=50ma iout=100ma vin=vce cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x502 4.4 4.6 4.8 5.0 5.2 5.4 4 4.5 5 5.5 6 input voltage v in (v) output voltage v out (v) iout=1ma iout=30ma iout=50ma iout=100ma vin=vce cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x502 4.95 5.00 5.05 5.5 5.6 5.7 5.8 5.9 6 input voltage v in (v) output voltage v out (v) iout=1ma iout=30ma iout=50ma iout=100ma vin=vce cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x092 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 1020304050 output current iout (ma) dropout voltage vdif (v) vin=vce cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x152 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 20406080100 output current iout (ma) dropout voltage vdif (v) vin=vce cin=1.0 f(ceramic),cl=0.1 f(ceramic) ta=-40 ta=25 ta=85 ta=-40 ta=25 ta=85 minimum operating voltage
14/36 xc6215 series (3) dropout voltage vs. ou tput current (continued) (4) supply current vs. input voltage xc6215x302 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 50 100 150 200 output current iout (ma) dropout voltage vdif (v) vin=vce cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x502 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 50 100 150 200 output current iout (ma) dropout voltage vdif (v) vin=vce cin=1.0 f(ceramic),cl=0.1 f(ceramic) ta=-40 ta=25 ta=85 ta=-40 ta=25 ta=85 xc6215x092 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0123456 input voltage v in (v) supply current i ss ( a) vin=vce cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x152 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0123456 input voltage vin (v) supply current i ss ( a) vin=vce cin=1.0 f(ceramic),cl=0.1 f(ceramic) ta=-40 ta=25 ta=85 ta=-40 ta=25 ta=85 xc6215x302 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0123456 input voltage vin (v) supply current i ss ( a) vin=vce cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x502 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0123456 input voltage vin (v) supply current i ss ( a) vin=vce cin=1.0 f(ceramic),cl=0.1 f(ceramic) ta=-40 ta=25 ta=85 ta=-40 ta=25 ta=85 typical performance characteristics (continued)
15/36 xc6215 series (5) output voltage vs. ambient temperature (6) supply current vs. ambient temperature typical performance characteristics (continued) xc6215x092 0.80 0.90 1.00 -50 -25 0 25 50 75 100 ambient temperature ta ( ) output voltage v out (v) iout=1ma iout=30ma iout=50ma vin=vce=1.9v cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x152 1.35 1.50 1.65 -50 -25 0 25 50 75 100 ambient temperature ta ( ) output voltage v out (v) iout=1ma iout=30ma iout=50ma vin=vce=2.5v cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x302 2.70 2.85 3.00 3.15 3.30 -50 -25 0 25 50 75 100 ambient temperature ta ( ) output voltage v out (v) iout=1ma iout=30ma iout=50ma vin=vce=4.0v cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x502 4.50 4.75 5.00 5.25 5.50 -50 -25 0 25 50 75 100 ambient temperature ta ( ) output voltage v out (v) iout=1ma iout=30ma iout=50ma vin=vce=6.0v cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x092 0.0 0.3 0.6 0.9 1.2 1.5 -50 -25 0 25 50 75 100 ambient temperature ta ( ) supply current i ss ( a) vin=vce=1.9v cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x152 0.0 0.3 0.6 0.9 1.2 1.5 -50 -25 0 25 50 75 100 ambient tem p erature ta ( ) supply current i ss ( a) vin=vce=2.5v cin=1.0 f(ceramic),cl=0.1 f(ceramic)
16/36 xc6215 series (6) supply current vs. am bient temperature (continued) (7) ce threshold voltage vs. ambient temperature typical performance characteristics (continued) xc6215x092 0.5 0.6 0.7 0.8 0.9 -50 -25 0 25 50 75 100 ambient temperature ta ( ) ce threshold voltage v ceh ,v cel (v) vin=1.9v , iout=1ma cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x152 0.5 0.6 0.7 0.8 0.9 -50 -25 0 25 50 75 100 ambient temperature ta ( ) ce threshold voltage v ceh ,v cel (v) vin=2.5v , iout=1ma cin=1.0 f(ceramic),cl=0.1 f(ceramic) high level voltage low level voltage high level voltage low level voltage xc6215x302 0.5 0.6 0.7 0.8 0.9 -50 -25 0 25 50 75 100 ambient temperature ta ( ) ce threshold voltage v ceh ,v cel (v) vin=4.0v , iout=1ma cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x502 0.5 0.6 0.7 0.8 0.9 -50 -25 0 25 50 75 100 ambient temperature ta ( ) ce threshold voltage v ceh ,v cel (v) vin=6.0v , iout=1ma cin=1.0 f(ceramic),cl=0.1 f(ceramic) high level voltage low level voltage high level voltage low level voltage xc6215x502 0.0 0.3 0.6 0.9 1.2 1.5 1.8 -50 -25 0 25 50 75 100 ambient tem p erature ta ( ) supply current i ss ( a) vin=vce=6.0v cin=1.0 f(ceramic),cl=0.1 f(ceramic) xc6215x302 0.0 0.3 0.6 0.9 1.2 1.5 -50 -25 0 25 50 75 100 ambient temperature ta ( ) supply current i ss ( a) vin=vce=4.0v cin=1.0 f(ceramic),cl=0.1 f(ceramic)
17/36 xc6215 series (8) input transient response typical performance characteristics (continued) xc6215x092 -2 -1 0 1 2 3 4 time (200 sec/div) input voltage v in (v) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 output voltage v out (v) tr=tf=5 sec vin=vce , iout =1m a , cl=0.1 f(ceramic) input voltage output voltage xc6215x092 -2 -1 0 1 2 3 4 time (400 sec/div) input voltage v in (v) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 output voltage v out (v) tr=tf=5 sec, vin=vce, iout =1ma , cl=1.0 f(ceramic) input voltage output voltage xc6215x092 -2 -1 0 1 2 3 4 time (200 sec/div) input voltage v in (v) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 output voltage v out (v) input voltage output voltage tr=tf=5 sec vin=vce , iout =30m a , cl=0.1 f(ceramic) xc6215x092 -2 -1 0 1 2 3 4 time (200 sec/div) input voltage v in (v) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 output voltage v out (v) input voltage output voltage tr=tf=5 sec, vin=vce, iout =30m a , cl=1.0 f(ceramic) xc6215x092 -2 -1 0 1 2 3 4 time (200 sec/div) input voltage v in (v) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 output voltage v out (v) input voltage output voltage tr=tf=5 sec vin=vce , iout=50ma , cl=0.1 f(ceramic) xc6215x092 -2 -1 0 1 2 3 4 time (200 sec/div) input voltage v in (v) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 output voltage v out (v) input voltage output voltage tr=tf=5 sec, vin=vce, iout=50ma , cl=1.0 f(ceramic)
18/36 xc6215 series (8) input transient response (continued) typical performance characteristics (continued) xc6215x152 -1.5 -0.5 0.5 1.5 2.5 3.5 4.5 time (400 sec/div) input voltage v in (v) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 output voltage v out (v) input v oltage output voltage tr=tf=5 sec vin=vce , iout=1ma , cl=0.1 f(ceramic) xc6215x152 -1.5 -0.5 0.5 1.5 2.5 3.5 4.5 tim e (400 sec/div) input voltage v in (v) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 output voltage v out (v) input v oltage output voltage tr=tf=5 sec, vin=vce, iout=1ma , cl=1.0 f( ????? ) xc6215x152 -1.5 -0.5 0.5 1.5 2.5 3.5 4.5 time (400 sec/div) input voltage v in (v) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 output voltage v out (v) input v oltage output voltage tr=tf=5 sec vin=vce , iout=30ma , cl=0.1 f(ceramic) xc6215x152 -1.5 -0.5 0.5 1.5 2.5 3.5 4.5 time (400 sec/div) input voltage v in (v) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 output voltage v out (v) input v oltage output voltage tr=tf=5 sec, vin=vce, iout=30ma , cl=1.0 f(ceramic) xc6215x152 -1.5 -0.5 0.5 1.5 2.5 3.5 4.5 time (400 sec/div) input voltage v in (v) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 output voltage v out (v) input voltage output voltage tr=tf=5 sec, vin=vce, iout=100ma, cl=0.1 f(ceramic) xc6215x152 -1.5 -0.5 0.5 1.5 2.5 3.5 4.5 tim e (400 sec/div) input voltage v in (v) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 output voltage v out (v) input v oltage output voltage tr=tf=5 sec, vin=vce, iout=100ma , cl=1.0 f(ceramic)
19/36 xc6215 series (8) input transient response (continued) typical performance characteristics (continued) xc6215x302 0 1 2 3 4 5 6 time (400 sec/div) input voltage v in (v) 2.0 2.5 3.0 3.5 4.0 4.5 5.0 output voltage v out (v) input voltage output voltage tr=tf=5 sec vin=vce , iout=1ma , cl=0.1 f(ceramic) xc6215x302 0 1 2 3 4 5 6 tim e (400 sec/div) input voltage v in (v) 2.0 2.5 3.0 3.5 4.0 4.5 5.0 output voltage v out (v) input voltage output voltage tr=tf=5 sec, vin=vce, iout=1ma , cl=1.0 f(ceram ic) xc6215x302 0 1 2 3 4 5 6 tim e (400 sec/div) input voltage v in (v) 2.0 2.5 3.0 3.5 4.0 4.5 5.0 output voltage v out (v) input voltage output voltage tr=tf=5 sec, vin=vce , iout=30ma , cl=0.1 f(ceramic) xc6215x302 0 1 2 3 4 5 6 tim e (400 sec/div) input voltage v in (v) 2.0 2.5 3.0 3.5 4.0 4.5 5.0 output voltage v out (v) input voltage output voltage tr=tf=5 sec, vin=vce, iout=30ma , cl=1.0 f(ceramic) xc6215x302 0 1 2 3 4 5 6 tim e (400 sec/div) input voltage v in (v) 2.0 2.5 3.0 3.5 4.0 4.5 5.0 output voltage v out (v) input voltage output voltage tr=tf=5 sec vin=vce , iout=100ma , cl=0.1 f(ceramic) xc6215x302 0 1 2 3 4 5 6 time (400 sec/div) input voltage v in (v) 2.0 2.5 3.0 3.5 4.0 4.5 5.0 output voltage v out (v) input voltage output voltage tr=tf=5 sec, vin=vce, iout=100ma , cl=1.0 f(ceramic)
20/36 xc6215 series (8) input transient response (continued) typical performance characteristics (continued) xc6215x502 1 2 3 4 5 6 7 time (400 sec/div) input voltage v in (v) 4.0 4.5 5.0 5.5 6.0 6.5 7.0 output voltage v out (v) input voltage output voltage tr=tf=5 sec, vin=vce, iout =1ma , cl=0.1 f(ceramic) xc6215x502 1 2 3 4 5 6 7 time (400 sec/div) input voltage v in (v) 4.0 4.5 5.0 5.5 6.0 6.5 7.0 output voltage v out (v) input voltage output voltage tr=tf=5 sec, vin=vce, iout=1ma , cl=1.0 f(ceramic) xc6215x502 1 2 3 4 5 6 7 tim e (400 sec/div) input voltage v in (v) 4.0 4.5 5.0 5.5 6.0 6.5 7.0 output voltage v out (v) input voltage output voltage tr=tf=5 sec, vin=vce, iout =30ma , cl=0.1 f(ceramic) xc6215x502 1 2 3 4 5 6 7 tim e (400 sec/div) input voltage v in (v) 4.0 4.5 5.0 5.5 6.0 6.5 7.0 output voltage v out (v) input voltage output voltage tr=tf=5 sec, vin=vce, iout=30ma, cl=1.0 f(ceramic) xc6215x502 1 2 3 4 5 6 7 tim e (400 sec/div) input voltage v in (v) 4.0 4.5 5.0 5.5 6.0 6.5 7.0 output voltage v out (v) input voltage output voltage tr=tf=5 sec, vin=vce, iout=100ma, cl=0.1 f(ceramic) xc6215x502 1 2 3 4 5 6 7 time (400 sec/div) input voltage v in (v) 4.0 4.5 5.0 5.5 6.0 6.5 7.0 output voltage v out (v) input voltage output voltage tr=tf=5 sec, vin=vce, iout =100m a , cl=1.0 f(ceramic)
21/36 xc6215 series (9) load transient response typical performance characteristics (continued) xc6215x092 0 10 20 30 40 50 tim e (200 sec/div) output current i out (ma) -1.0 -0.5 0.0 0.5 1.0 1.5 output voltage v out (v) tr=tf=5 sec, vin=vce=1.9v, cin=1.0 f(ceramic),cl=0.1 f(ceramic) output voltage output current xc6215x092 0 10 20 30 40 50 time (600 sec/div) output current i out (ma) -1.0 -0.5 0.0 0.5 1.0 1.5 output voltage v out (v) tr=tf=5 sec, vin=vce=1.9v, cin=1.0 f(ceramic),cl=1.0 f(ceramic) output voltage output current xc6215x152 0 10 20 30 40 50 tim e (200 sec/div) output current i out (ma) -0.5 0.0 0.5 1.0 1.5 2.0 output voltage v out (v) tr=tf=5 sec, vin=vce=2.5v, cin=1.0 f(ceramic),cl=0.1 f(ceramic) output voltage output current xc6215x152 0 10 20 30 40 50 time (400 sec/div) output current i out (ma) -0.5 0.0 0.5 1.0 1.5 2.0 output voltage v out (v) tr=tf=5 sec, vin=vce=2.5v, cin=1.0 f(ceramic), cl=1.0 f(ceramic) output voltage output current xc6215x152 0 50 100 150 200 250 tim e (200 sec/div) output current i out (ma) -0.5 0.0 0.5 1.0 1.5 2.0 output voltage v out (v) tr=tf=5 sec, vin=vce=2.5v, cin=1.0 f(ceramic),cl=0.1 f(ceramic) output voltage output current xc 6 2 1 5 x 1 5 2 0 50 100 150 200 250 tim e (200 sec/div) output current i out (ma) -0.5 0.0 0.5 1.0 1.5 2.0 output voltage v out (v) tr=tf=5 sec, vin=vce=2.5v, cin=1.0 f(ceramic), cl=1.0 f(ceramic) output voltage output current
22/36 xc6215 series (9) load transient response (continued) typical performance characteristics (continued) xc6215x302 0 10 20 30 40 50 time (400 sec/div) output current i out (ma) 1.0 1.5 2.0 2.5 3.0 3.5 output voltage v out (v) tr=tf=5 sec, vin=vce=4.0v, cin=1.0 f(ceramic), cl=0.1 f(ceram ic) output voltage output current xc6215x302 0 10 20 30 40 50 time (400 sec/div) output current i out (ma) 1.0 1.5 2.0 2.5 3.0 3.5 output voltage v out (v) tr=tf=5 sec, vin=vce=4.0v, cin=1.0 f(ceramic),cl=1.0 f(ceramic) output voltage output current xc6215x302 0 50 100 150 200 250 tim e (600 sec/div) output current i out (ma) 1.0 1.5 2.0 2.5 3.0 3.5 output voltage v out (v) tr=tf=5 sec, vin=vce=4.0v, cin=1.0 f(ceramic), cl=0.1 f(ceramic) output voltage output current xc6215x302 0 50 100 150 200 250 time (600 sec/div) output current i out (ma) 1.0 1.5 2.0 2.5 3.0 3.5 v out (v) tr=tf=5 sec, vin=vce=4.0v, cin=1.0 f(ceramic),cl=1.0 f(ceramic) output voltage output current xc6215x502 0 10 20 30 40 50 time (400 sec/div) output current i out (ma) 3.0 3.5 4.0 4.5 5.0 5.5 output voltage v out (v) tr=tf=5 sec, vin=vce=6.0v, cin=1.0 f(ceramic),cl=0.1 f(ceramic) output voltage output current xc6215x502 0 10 20 30 40 50 tim e (400 sec/div) output current i out (ma) 3.0 3.5 4.0 4.5 5.0 5.5 output voltage v out (v) tr=tf=5 sec, vin=vce=6.0v, cin=1.0 f(ceramic), cl=1.0 f(ceram ic) output voltage output current
23/36 xc6215 series (9) load transient response (continued) (10) rising response time typical performance characteristics (continued) xc6215x502 0 50 100 150 200 250 tim e (400 sec/div) output current i out (ma) 3.0 3.5 4.0 4.5 5.0 5.5 output voltage v out (v) tr=tf=5 sec, vin=vce=6.0v, cin=1.0 f(ceramic),cl=0.1 f(ceramic) output voltage output current xc6215x502 0 50 100 150 200 250 tim e (400 sec/div) output current i out (ma) 3.0 3.5 4.0 4.5 5.0 5.5 output voltage v out (v) tr=tf=5 sec, vin=vce=6.0v, cin=1.0 f(ceramic),cl=1.0 f(ceramic) output voltage output current xc6215x092 -3 -2 -1 0 1 2 3 tim e (50 sec/div) input voltage vin (v) 0 1 2 3 4 5 6 output voltage v out (v ) tr=5 se c vin=vce =0v 1.9v, iout=1ma , cl=0.1 f(ceramic) output voltage input voltage xc6215x092 -3 -2 -1 0 1 2 3 tim e (50 sec/div) input voltage v in (v ) 0 1 2 3 4 5 6 output voltage v out (v ) tr=5 se c vin=vce =0v 1.9v, iout=30ma , cl=0.1 f(ceramic) output voltage input voltage xc6215x152 -3 -2 -1 0 1 2 3 tim e (50 sec/div) input voltage v in (v ) 0 1 2 3 4 5 6 output voltage v out (v ) tr=5 se c vin=vce =0v 2.5v, iout=1ma , cl=0.1 f(ceramic) output voltage input voltage xc6215x092 -3 -2 -1 0 1 2 3 tim e (50 sec/div) input voltage v in (v ) 0 1 2 3 4 5 6 output voltage v out (v ) tr=5 se c vin=vce =0v 1.9v, iout=50ma , cl=0.1 f(ceramic) output voltage input voltage
24/36 xc6215 series (10) rising response time (continued) typical performance characteristics (continued) xc6215x152 -3 -2 -1 0 1 2 3 tim e (50 sec/div) input voltage v in (v) 0 1 2 3 4 5 6 output voltage v out (v) tr=5 se c vin=vce =0v 2.5v, iout=30ma , cl=0.1 f(ceramic) output voltage input voltage xc6215x152 -3 -2 -1 0 1 2 3 time (50 sec/div) input voltage v in (v) 0 1 2 3 4 5 6 output voltage v out (v) tr=5 se c vin=vce =0v 2.5v, iout=100ma , cl=0.1 f(ceramic) output voltage input voltage xc6215x302 -6 -4 -2 0 2 4 6 time (100 sec/div) input voltage v in (v) 0 1.5 3 4.5 6 7.5 9 output voltage v out (v) tr=5 se c vin=vce =0v 4.0v, iout=1ma , cl=0.1 f(ceramic) output voltage input voltage xc6215x302 -6 -4 -2 0 2 4 6 time (100 sec/div) input voltage v in (v) 0 1.5 3 4.5 6 7.5 9 output voltage v out (v) tr=5 se c vin=vce =0v 4.0v, iout=30ma , cl=0.1 f(ceram ic) output voltage input voltage xc6215x302 -6 -4 -2 0 2 4 6 time (100 sec/div) input voltage v in (v) 0 1.5 3 4.5 6 7.5 9 output voltage v out (v) tr=5 se c vin=vce =0v 4.0v, iout=100ma , cl=0.1 f(ceramic) output voltage input voltage xc6215x502 -9 -6 -3 0 3 6 9 time (200 sec/div) input voltage v in (v) 0 2.5 5 7.5 10 12.5 15 output voltage v out (v) tr=5 se c vin=vce =0v 6.0v, iout=1ma , cl=0.1 f(ceramic) output voltage input voltage
25/36 xc6215 series (10) rising response time (continued) (11) ce rising response time (for xc6215b type) typical performance characteristics (continued) xc6215x502 -9 -6 -3 0 3 6 9 tim e (200 sec/div) input voltage v in (v) 0 2.5 5 7.5 10 12.5 15 output voltage v out (v) tr=5 se c vin=vce =0v 6.0v, iout=100ma , cl=0.1 f(ceramic) output voltage input voltage xc6215x502 -9 -6 -3 0 3 6 9 tim e (200 sec/div) input voltage v in (v) 0 2.5 5 7.5 10 12.5 15 output voltage v out (v) tr=5 se c vin=vce =0v 6.0v, iout=30ma , cl=0.1 f(ceram ic) output voltage input voltage xc6215b092 -3 -2 -1 0 1 2 3 tim e (50 sec/div) ce input voltage v ce (v ) 0 1 2 3 4 5 6 output voltage v out (v ) tr=5 sec ,vin=1.9v vce =0 1.9v, iout=1ma , cl=0.1 f(ceram ic) output voltage ce input voltage xc6215b092 -3 -2 -1 0 1 2 3 tim e (50 sec/div) ce input voltage v ce (v ) 0 1 2 3 4 5 6 output voltage v out (v ) tr=5 sec ,vin=1.9v vce =0 1.9v, iout=30ma , cl=0.1 f(ceram ic) output voltage ce input voltage xc6215b092 -3 -2 -1 0 1 2 3 tim e (50 sec/div) ce input voltage v ce (v ) 0 1 2 3 4 5 6 output voltage v out (v ) tr=5 sec ,vin=1.9v vce =0 1.9v, iout=50ma , cl=0.1 f(ceram ic) output voltage ce input voltage xc6215b152 -3 -2 -1 0 1 2 3 time (100 sec/div) ce input voltage v ce (v ) 0 1 2 3 4 5 6 output voltage v out (v ) tr=5 sec ,vin=2.5v vce =0 2.5v, iout=1ma , cl=0.1 f(ceramic) output voltage ce input voltage
26/36 xc6215 series (11) ce rising response time (continued) typical performance characteristics (continued) xc6215b152 -3 -2 -1 0 1 2 3 time (100 sec/div) ce input voltage v ce (v ) 0 1 2 3 4 5 6 output voltage v out (v ) tr=5 sec ,vin=2.5v vce =0 2.5v, iout=30ma , cl=0.1 f(ceramic) output voltage ce input voltage xc6215b152 -3 -2 -1 0 1 2 3 time (100 sec/div) ce input voltage v ce (v ) 0 1 2 3 4 5 6 output voltage v out (v ) tr=5 sec ,vin=2.5v vce =0 2.5v, iout=100ma, cl=0.1 f(ceramic) output voltage ce input voltage xc6215b302 -6 -4 -2 0 2 4 6 tim e (200 sec/div) ce input voltage v ce (v ) 0 1 2 3 4 5 6 output voltage v out (v ) tr=5 sec ,vin=4.0v vce =0 4.0v, iout=1ma, cl=0.1 f(ceram ic) output voltage ce input voltage xc6215b302 -6 -4 -2 0 2 4 6 tim e (200 sec/div) ce input voltage v ce (v ) 0 1 2 3 4 5 6 output voltage v out (v ) tr=5 sec ,vin=4.0v vce =0 4.0v, iout =30ma , cl=0.1 f(ceramic) output voltage ce input voltage xc6215b302 -6 -4 -2 0 2 4 6 time (200 sec/div) ce input voltage v ce (v ) 0 1 2 3 4 5 6 output voltage v out (v ) tr=5 sec ,vin=4.0v vce =0 4.0v, iout=100ma , cl=0.1 f(ceramic) output voltage ce input voltage xc6215b502 -4 -2 0 2 4 6 8 tim e (200 sec/div) ce input voltage v ce (v ) 0 2 4 6 8 10 12 output voltage v out (v ) tr=5 sec ,vin=6.0v vce =0 6.0v, iout=1ma, cl=0.1 f(ceramic) output voltage ce input voltage
27/36 xc6215 series (11) ce rising response time (for xc6215 type) (12) ripple rejection rate typical performance characteristics (continued) xc6215b502 -4 -2 0 2 4 6 8 tim e (200 sec/div) ce input voltage v ce (v ) 0 2 4 6 8 10 12 output voltage v out (v ) tr=5 sec ,vin=6.0v vce =0 6.0v, iout =100ma , cl=0.1 f(ceram ic) output voltage ce input voltage xc6215b502 -4 -2 0 2 4 6 8 tim e (200 sec/div) ce input voltage v ce (v ) 0 2 4 6 8 10 12 output voltage v out (v ) tr=5 sec ,vin=6.0v vce =0 6.0v, iout=30ma, cl=0.1 f(ceramic) output voltage ce input voltage xc6215x302 0 10 20 30 40 50 60 70 0.01 0.1 1 10 100 ripple frequency f (khz) ripple rejection rate rr (db) vin=vce=4.0vdc+0.5vp-pac iout =50ma , cl=0.1 f(ceramic) xc6215x502 0 10 20 30 40 50 60 70 0.01 0.1 1 10 100 ripple frequency f (khz) ripple rejection rate rr (db) vin=vce=5.5vdc+0.5vp-pac iout=50ma, cl=0.1 f(ceramic) xc6215x092 0 10 20 30 40 50 60 70 0.01 0.1 1 10 100 ripple frequency f (khz) ripple rejection rate rr (db) vin=vce=2.0vdc+0.5vp-pac iout=50ma , cl=0.1 f(ceram ic) xc6215x152 0 10 20 30 40 50 60 70 0.01 0.1 1 10 100 ripple frequency f (khz) ripple rejection rate rr (db) vin=vce=2.5vdc+0.5vp-pac iout=50ma , cl=0.1 f(ceram ic)
28/36 xc6215 series packaging information usp-4 usp-3 reference pattern layout reference metal mask design (unit : mm) (unit : mm) reference pattern layout reference metal mask design
29/36 xc6215 series sot-25 ssot-24 packaging information ( continued ) 1 3 2.90.2 0.4 +0.1 -0.05 1.6 +0.2 -0.1 1.90.2 2.80.2 1.10.1 1.3max 0.15 +0.1 -0.05 0.2min 00.1 2 5 4 (0.95) (unit : mm) (unit : mm) uspn-4 reference pattern layout reference metal mask design (unit: mm)
30/36 xc6215 series mark type output voltage range product series t 0.9v ~ 3.0v u ce pin, high active with no pull-down resistor built in 3.1v ~ 5.0v xc6215bxxxxx mark output voltage (v) mark output voltage (v) 0 - 3.1 - f 1.6 4.6 - 1 - 3.2 - h 1.7 4.7 - 2 - 3.3 - k 1.8 4.8 - 3 - 3.4 - l 1.9 4.9 - 4 - 3.5 - m 2.0 5.0 - 5 - 3.6 - n 2.1 - - 6 - 3.7 - p 2.2 - - 7 - 3.8 - r 2.3 - - 8 0.9 3.9 - s 2.4 - - 9 1.0 4.0 - t 2.5 - - a 1.1 4.1 - u 2.6 - - b 1.2 4.2 - v 2.7 - - c 1.3 4.3 - x 2.8 - - d 1.4 4.4 - y 2.9 - - e 1.5 4.5 - z 3.0 - - mark product series e xc6215xxxxxx mark type output voltage range product series t 0.9v ~ 3.0v u ce pin, high active with no pull-down resistor built in 3.1v ~ 5.0v xc6215xxxxxx mark output voltage (v) mark output voltage (v) 0 - 3.1 - f 1.6 4.6 - 1 - 3.2 - h 1.7 4.7 - 2 - 3.3 - k 1.8 4.8 - 3 - 3.4 - l 1.9 4.9 - 4 - 3.5 - m 2.0 5.0 - 5 - 3.6 - n 2.1 - - 6 - 3.7 - p 2.2 - - 7 - 3.8 - r 2.3 - - 8 0.9 3.9 - s 2.4 - - 9 1.0 4.0 - t 2.5 - - a 1.1 4.1 - u 2.6 - - b 1.2 4.2 - v 2.7 - - c 1.3 4.3 - x 2.8 - - d 1.4 4.4 - y 2.9 - - e 1.5 4.5 - z 3.0 - - 12 3 4 r epresents production lot numbe r 0 to 9, a to z repeated. (g, i, j, o, q, w excluded) note: no character inversion used. represents type of regulator and output voltage range represents decimal point of output voltage marking rule sso t -24 usp-4 top view usp-3 top view represents product series represents type of regulator and output voltage range represents output voltage r epresents production lot numbe r 0 to 9, a to z repeated. (g, i, j, o, q, w excluded) note: no character inversion used. usp-4, usp-3 ssot-24 (top view)
31/36 xc6215 series 123 54 sot-25 (top view) mark product series e xc6215xxxxxx mark type output voltage range product series t 0.9v~3.0v u ce pin, high active with no pull-down resistor built in 3.1v~5.0v xc6215xxxxxx mark output voltage (v) mark output voltage (v) 0 - 3.1 - f 1.6 4.6 - 1 - 3.2 - h 1.7 4.7 - 2 - 3.3 - k 1.8 4.8 - 3 - 3.4 - l 1.9 4.9 - 4 - 3.5 - m 2.0 5.0 - 5 - 3.6 - n 2.1 - - 6 - 3.7 - p 2.2 - - 7 - 3.8 - r 2.3 - - 8 0.9 3.9 - s 2.4 - - 9 1.0 4.0 - t 2.5 - - a 1.1 4.1 - u 2.6 - - b 1.2 4.2 - v 2.7 - - c 1.3 4.3 - x 2.8 - - d 1.4 4.4 - y 2.9 - - e 1.5 4.5 - z 3.0 - - marking rule ( continued ) so t -25 represents product series represents output voltage ? r epresents production lot numbe r 0 to 9, a to z repeated. (g, i, j, o, q, w excluded) note: no character inversion used. uspn-4 uspn-4 (top view) represents type of regulators and output voltage range
32/36 xc6215 series sot-25 power dissipation board mount (tj max = 125 ) ambient temperature power dissipation pd mw thermal resistance ( /w) 25 600 85 240 166.67 pd-ta? 0 100 200 300 400 500 600 700 25 45 65 85 105 125 x?ta S?p?pdmw power dissipation data for the sot-25 is shown in this page. the value of power dissipation varies with the mount board conditions. please use this data as one of reference data taken in the described condition. 1. measurement condit ion (reference data) condition: mount on a board ambient: natural convection soldering: lead (pb) free board: dimensions 40 x 40 mm (1600 mm 2 in one side) copper (cu) traces occupy 50% of the board area in top and back faces package heat-sink is tied to the copper traces (board of sot-26 is used.) material: glass epoxy (fr-4) thickness: 1.6 mm through-hole: 4 x 0.8 diameter 2. power dissipation vs. ambient temperature pd vs. ta ambient temperature ta ( ) power dissi p ation pd ( mw ) u??gmm evaluation board (unit: mm)
33/36 xc6215 series ssot-24 power dissipation board mount (tj max = 125 ) ambient temperature power dissipation pd mw thermal resistance ( /w) 25 500 85 200 200.00 power dissipation data for the ssot-24 is shown in this page. the value of power dissipation varies with the mount board conditions. please use this data as one of reference data taken in the described condition. 1. measurement condit ion (reference data) condition: mount on a board ambient: natural convection soldering: lead (pb) free board: dimensions 40 x 40 mm (1600 mm 2 in one side) copper (cu) traces occupy 50% of the board area in top and back faces package heat-sink is tied to the copper traces material: glass epoxy (fr-4) thickness: 1.6 mm through-hole: 4 x 0.8 diameter 2. power dissipation vs. ambient temperature evaluation board (unit: mm)
34/36 xc6215 series usp-4 power dissipation board mount (tj max = 125 ) ambient temperature power dissipation pd mw thermal resistance ( /w) 25 1000 85 400 100.00 power dissipation data for the usp-4 is shown in this page. the value of power dissipation varies with the mount board conditions. please use this data as one of reference data taken in the described condition. evaluation board (unit: mm) 1. measurement condit ion (reference data) condition: mount on a board ambient: natural convection soldering: lead (pb) free board: dimensions 40 x 40 mm (1600 mm 2 in one side) copper (cu) traces occupy 50% of the board area in top and back faces package heat-sink is tied to the copper traces material: glass epoxy (fr-4) thickness: 1.6 mm through-hole: 4 x 0.8 diameter 2. power dissipation vs. ambient temperature 40.0 40.0 2.5 28.9 28.9 1.4 2.54
35/36 xc6215 series uspn-4 power dissipation board mount (tj max = 125 ) ambient temperature power dissipation pd mw thermal resistance ( /w) 25 600 85 240 166.67 power dissipation data for the uspn-4 is shown in this page. the value of power dissipation varies with the mount board conditions. please use this data as one of reference data taken in the described condition. evaluation board (unit: mm) 1.measurement condition (reference data) condition: mount on a board ambient: natural convection soldering: lead (pb) free board: dimensions 40 x 40 mm (1600 mm 2 in one side) copper (cu) traces occupy 50% of the front and 50% of the back. the copper area is divided into four block, one block is 12.5% of total. the uspn-4 package has for terminals. each terminal connects one copper block in the front and one in the back. material: glass epoxy (fr-4) thickness: 1.6 mm through-hole: 4 x 0.8 diameter 2. power dissipation vs. ambient temperature
36/36 xc6215 series 1. the products and product specifications cont ained herein are subject to change without notice to improve performance characteristic s. consult us, or our representatives before use, to confirm that the informat ion in this datasheet is up to date. 2. we assume no responsibility for any infri ngement of patents, pat ent rights, or other rights arising from the use of any information and circuitry in this datasheet. 3. please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this datasheet. 4. the products in this datasheet are not devel oped, designed, or approved for use with such equipment whose failure of malfuncti on can be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. atomic energy; aerospace; transpor t; combustion and associated safety equipment thereof.) 5. please use the products listed in this datasheet within the specified ranges. should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. we assume no responsibility for damage or loss due to abnormal use. 7. all rights reserved. no part of this dat asheet may be copied or reproduced without the prior permission of torex semiconductor ltd.

▲Up To Search▲

Price & Availability of XC6215P502GR-G

	To Download XC6215P502GR-G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .